Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 177 / 700

Chapter 3: Certify Twisted Pair Cabling
Frequency-Domain Results
141
GPU196.EPS
Figure 63. Resistance Unbalance Between Pairs
 The
VALUE
is the difference in the resistances of the pairs. The
resistance of each pair is the parallel resistance of the wires in
the pair. The tester uses the measured resistance of the wires to
calculate the parallel resistance of the pair. Then, the tester
uses the resistance of each pair and the maximum unbalanced
percentage specified by the selected test limit to calculate the
LIMIT
for each pair. The
VALUE
is in a red box if it exceeds the
LIMIT
.
 The overall result for the pair-to-pair resistance unbalance test.
B
A