Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 580 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
544
To Change the Tests in a Project
When you use a project, you usually do only the tests that the
project specifies. You select these tests from the list on the
CHANGE TEST
screen in the project.
If necessary, you can add a test to the project or change the
settings for a test in the project.
To select a different test in the project
1
On the home screen, tap the test setup panel.
2
On the
CHANGE TEST
screen tap the test you want to do. See
Figure 201 on page 533.
3
Tap
USE SELECTED
.
To add a test to a project
1
On the home screen, tap the test setup panel or the
PROJECT
panel.
2
Tap
NEW TEST
.
3
On the
TEST TYPE
screen, tap a test.
4
On the
TEST SETUP
screen, change the test settings as
necessary, then tap
SAVE
.
To include a fiber test in the % Tested value
If you add an OptiFiber Pro OTDR, CertiFiber Pro loss length,
FiberInspector, or FaultMap test to a project, but do not select the
test on the
CABLE ID SETUP
,
EDIT CABLE IDs
, or
IMPORTED IDs
screen, the results you save for the test do not affect the
%
Tested
value.To include a test in the % Tested value
1
On the home screen, tap the
PROJECT
panel, then on the
PROJECT
screen, tap a fiber ID set that has a
First
and
Last ID
.