Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 89 / 700

Chapter 2: Get Started
Tutorial: Do a Bi-directional SmartLoop Test
53
Step 1: See How Much Memory is Available
On the home screen, tap the
TOOLS
icon, then tap
Memory
Status
.
The
MEMORY STATUS
screen shows these values:
 The percentage of memory available

The number of test records that are saved
 The number of ID sets that have been downloaded to the
tester from LinkWare PC or LinkWare Live.
 The memory space taken by other files, such as the databases
for projects and limits.
Step 2: Set Up a Bi-directional SmartLoop Test
Note
You can select settings for any module that the
tester can use. It is not necessary to install a
module before you set up a test for that module.
If a module is not installed, the MODULE screen
shows to let you select the module you will use.
2-1
Attach an OptiFiber Pro module to the tester.
2-2
On the home screen, tap the test setup panel.
2-3
On the
CHANGE TEST
screen, tap
NEW TEST
.
2-4
On the
TEST TYPE
screen, tap
SmartLoop OTDR (Auto)
.
2-5
On the
TEST SETUP
screen, tap each setting to make these
selections:

Module:
This is the module you will use for the test.
(continued)