Fluke CableAnalyzer DSX-5000 Technical Reference Handbook Download Page 38

Page: 38 / 700

Versiv Series Cabling Certification Product Family

Technical Reference Handbook



ProjX

™

management system lets you set up projects to specify

the types of tests and the cable IDs necessary for a job and
monitor the progress and status of the job.



You can connect the tester to a wired or Wi-Fi network and
use the LinkWare

™

Live web application to manage your

projects from a desktop or mobile device.



LinkWare PC software lets you upload test results to a PC and
make professional-quality test reports.



LinkWare Stats software makes browsable, graphical reports
of cable test statistics.

Versiv 2 Compatibility

Versiv 2 testers are not compatible with Versiv testers.

Versiv 2 mainframes do not support the OptiView XG
Performance Test Remote or the OneTouch AT Network Assistant
modules.

Contact Fluke Networks



www.flukenetworks.com/support

[email protected]

1-800-283-5853

+1-425-446-5500

Fluke Networks
6920 Seaway Boulevard, MS 143F
Everett WA 98203 USA

Fluke Networks operates in more than 50 countries worldwide.
For more contact information, go to our website.

Summary of Contents for CableAnalyzer DSX-5000





























































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CableAnalyzer DSX-5000

Reviews:

Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 38 / 700

Search results

Summary of Contents for CableAnalyzer DSX-5000

Reviews: