Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 569 / 700

Chapter 17: Use Projects
Tutorial: How to Use a Project for Tests with a CableAnalyzer Module
533
Step 2: Select a Test for Twisted Pair Cable
On the home screen, tap the test type panel, on the
CHANGE
TEST
screen (Figure 201), tap the test you made for twisted pair
cable, then tap
USE SELECTED
.
If the active ID set was not made for copper media, the tester
shows a warning. When you tap
OK
, the tester shows the
CHANGE CABLE IDs
screen. Select the copper ID set that starts
with B-00, which you made in the previous tutorial.
GPU54.EPS
Figure 201. CHANGE TEST Screen
 To select a test, tap the test.
 To add a test to the project, tap
NEW TEST
.
A
B
C D