Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 516 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
480

This button shows with bi-directional SmartLoop results
and bi-directional OTDR results from single fibers. Tap this
button to see results from each direction (
End 1
or
End 2
) or
the averaged results (

).
This button shows if you do a bi-directional test on a single
fiber, but the tester does not calculate averaged results. This can
occur for example if the distance to the end was not the same
in both directions or if a span was defined when you did the
test. Tap this button to see results from each direction (
End 1
or
End 2
). To remove the span definition, tap
Tools
,
Span
, then
tap
Delete
.
 The event editing function lets you edit loss events. See
“How to Edit a Loss Event” on page 481.
 This line shows which results are on the display. Use the
selection buttons (
 and  ) to see other results.

Overall Loss
: The average loss of the two directions.

Fiber Length
: The longest length of the two directions.

PASS/FAIL
: The overall result for the fibers.

PASS
: The averaged results passed. It is possible for one or
both directions to have
FAIL
results, while the overall
result is
PASS
.

FAIL
: The averaged results failed.
Note
The tester does not use the bi-directional average
results in the calculation for the % Tested that
shows on the home screen.