Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 47 / 700

Chapter 1: Get Acquainted
W
Safety Information
11

Do not connect APC (angled physical contact)
connectors to the output or input ports. An APC
connector can damage the UPC fiber endface in the
ports.

To make sure your test results are as accurate as
possible, do the reference procedure frequently. See
“About the Reference for Fiber Tests” on page 245.

Use only high-quality test reference cords that
comply with the standards. See “About Test
Reference Cords and Mandrels” on page 247
For OptiFiber Pro OTDR Modules
W
Warning: Class 1 and Class 2 Laser Products
*
To prevent possible eye damage caused by
hazardous radiation:

Do not look directly into optical connectors. Some
optical equipment emits invisible radiation that can
cause permanent damage to your eyes.

Do not do any tests that activate the outputs on the
tester unless a fiber is attached to the output.

When you inspect fiber endfaces, use only
magnification devices that have the correct filters.

Use the Product only as specified or hazardous laser
radiation exposure can occur.