Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 608 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
572
3
Under the
Cable Type
, tap
NVP
.
4
Attach a channel adapter to the tester.
5
Connect a known length of twisted pair cable to the tester.
The cable must be a minimum of 30 m (100 ft) long.
6
Tap
MEASURE
.
7
On the
NVP
screen, use or to change the NVP value
until the measured length is the length of the cable, then tap
SAVE
.
Reset the NVP to the Default Value
To reset the NVP to the default value defined by the selected
cable type, select the cable type again on the
TEST SETUP
screen.
Make a Custom Outlet Configuration
Custom outlet configurations start with the T568A or T568B
configurations. You can enable or disable each pair, and give the
configuration a name.
To make a custom outlet configuration
1
On the home screen, tap the test setup panel, tap a copper
test, then tap
EDIT
.
2
On the
TEST SETUP
screen, tap
Outlet Configuration
.
3
Tap
CUSTOM
, then tap
MANAGE
, then tap the
Create
panel.
4
Select the
T568A
or
T568B
configuration then select the pairs
you want enabled.
5
Enter a name for the configuration, then tap
SAVE
. The tester
adds an asterisk (*) to the start and end of the custom
configuration name.
6
To use the configuration, tap it on the
OUTLET CONFIG
screen, then tap
USE SELECTED
.