Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 68 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
32
2
Tap
Timeout Period
, then tap
Backlight
or
Power Down
.
3
Tap a time. To always keep the backlight or tester on, tap
Disabled
.
4
To go back to the home screen, tap two times or press

.
The remote tester turns off after 60 minutes of inactivity. You
cannot change this setting.
Audible Tone
You can enable or disable the tones the tester makes during tests
and when you press keys. If you connect a remote tester to the
main tester through DSX or CertiFiber Pro modules, the remote
uses the main tester’s setting.
1
On the home screen, tap the
TOOLS
icon.
2
In the
Audible Tone
panel, tap the control to show
On
or
Off
.
3
To go back to the home screen, tap or press

.
Power Line Frequency
Set the power line frequency to the power frequency in the area
where you will use the tester. This setting decreases the effects of
ac noise on the circuits in the tester.
1
On the home screen, tap the
TOOLS
icon.
2
In the
Power Line Frequency
panel, tap the control to show
50 Hz
or
60 Hz
.
3
To go back to the home screen, tap or press

.