manualshive.com logo in svg

Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 634 / 700

Share
Download
Fluke CableAnalyzer DSX-5000 Technical Reference Handbook Download Page 634

Versiv Series Cabling Certification Product Family

Technical Reference Handbook

598

If the Tester Does Not Operate as Usual

If the tester does not operate as usual or if it shows an unusual 
message, see Table 26 for possible explanations and solutions to 
some conditions that can occur.

If the condition continues, contact Fluke Networks for assistance, 
or search the Fluke Networks Knowledge Base for a solution. 

If you contact Fluke Networks, have available the serial number, 
software and hardware versions, and calibration date for the 
tester, if possible. To see this information, tap the 

TOOLS

 icon on 

the home screen, then tap 

Version Information

. If the tester does 

not turn on, remove the modules to find the stickers with the 
serial numbers. 

You can also use LinkWare PC software to upload the system log 
from the tester. This file contains information that can possibly 
help Fluke Networks find a solution to an unusual problem.

Before You Send a Main Tester to a Service 
Center

W

Caution

If you send a main tester to a Service Center, make 
sure you download any test results you must keep 
to LinkWare Live, LinkWare PC, or to a USB flash 
drive. Service procedures can possibly delete test 
results, and Fluke Networks is not liable for lost 
results.

Summary of Contents for CableAnalyzer DSX-5000





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments