Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 578 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
542
To use a different, unused ID from an ID set that has a first and last
ID
If
Auto Save
is on or off:
1
On the home screen, tap the
Next ID
panel.
2
On the
CHANGE ID
screen, tap an ID in the list under
IDs
Untested
, then tap
DONE
.
3
Do the test. After you save the results, the tester uses the next
ID in the set for the next results.
If
Auto Save
is off:
1
Do the test, then tap
SAVE
if the test passed or
FIX LATER
if
the test failed.
2
Enter the ID on the
SAVE RESULT
screen, then tap
SAVE
. After
you save the results, the tester uses the next ID in the set for
the next results.
To use an ID you used before

If the test failed before, turn on
Auto Save,
select the saved
result on the
RESULTS
screen, then tap
TEST AGAIN
or press

. See “How to Make ID Sets” on page 548.
 If the test passed before, do the test again, then enter the ID
on the
SAVE RESULT
screen.
To use an ID that is not in an ID set that has a first and last ID
If
Auto Save
is on or off:
1
On the home screen, tap the
Next ID
panel.
2
On the
CHANGE ID
screen, tap the panel that shows the
Next
ID
.
3
Use the keyboard to enter an ID, then tap
DONE
on the
keyboard.