Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 116 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
80

TOOLS
: The
TOOLS
menu lets you set the reference, see the
status of the tester, and set user preferences such as the
language and the display brightness.

RESULTS
: Tap
RESULTS
to see and manage the results that are
saved in the tester.

SYNC
: To upload results to LinkWare Live, tap
SYNC
. See Chapter
18.

TEST
: Tap
TEST
to do the test shown in the test setup panel.
 The percentage of the tests in the project that are completed.
The tester uses the number of available IDs to calculate this
percentage. See Figure 199 on page 528.
% Tested
does not
show if your project contains only a
Next ID
list. See “To Make ID
Sets with International Characters” on page 550 for more
information about the
Next ID
list.
 The type of module attached to the tester.
 This icon shows when the tester’s link interface adapter is
connected to the adapter on a remote and the remote is turned
on.
DSX-5000 only: The arrows on the remote connection icon
are orange when the main and remote use long-range
communication mode. See “Long-Range Communication Mode
(DSX-5000)” on page 158.
 The asset management icon shows when the owner of a
LinkWare Live account has enabled the asset management
service for the tester. See “About the Asset Management
Service” on page 566.
 This icon shows when the talk function is on. See “How to
Use the Talk Function” on page 157.