Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 115 / 700

Chapter 3: Certify Twisted Pair Cabling
The DSX CableAnalyzer Home Screen
79

Shows a summary of the test results in the project:
The number of tests that passed.
The number of tests that failed.
The number of results from tests on twisted pair cable that
have
PASS*
results.
PASS*
results have measurements within
the range of accuracy uncertainty for the tester. See “PASS*/
FAIL* Results” on page 98.
 The test setup panel shows the settings the tester will use when
you tap
TEST
or press

. To change these settings, tap the
panel.
Note
You can set up tests for any module that the tester
can use, even when no module is attached.

Icons show the status of the
Store Plot Data
and
AC Wire Map
settings. See Table 3 on page 86.

Next ID
: The
Next ID
panel shows the ID that the tester gives to
the next test results you save.
Tap
Next ID
to do these tasks:
 Enter an ID, select a different ID in the ID set, select a
different set of IDs, or make a new set. The tester adds the
IDs and ID sets you make to the project that shows on the
home screen.
 Turn
Auto Save
on or off.

Operator
: The name of the person who does the job. You can
enter a maximum of 20 operator names. For each operator you
can also enter the email address that the operator will use as an
ID to sign in to LinkWare Live.