Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 259 / 700

Chapter 8: Inspect Fiber Endfaces
How to Do the FiberInspector Test
223
4
Use the buttons on the probe or the tester to start the test:
 Press the button on the probe.

If the FiberInspector test shows on in the test setup panel
on the home screen, tap
TEST
or press

.

On the home screen, tap the
TOOLS
icon, then tap
FiberInspector
.
5
Insert the probe into the connector.
6
To adjust the focus, turn the dial on the probe clockwise or
counterclockwise.
Figure 99 describes the FiberInspector display.
7
To save the image, tap
SAVE
.
8
On the
SAVE RESULT
screen, select
End 1
or
End 2
, make sure
the
Cable ID
and
End
name are correct, then tap
SAVE
.
Saved FiberInspector results show these icons for
End 1
and
End
2
:
Notes
The Auto Save function does not operate with the
FiberInspector test.
Continuous use of the video probe decreases the
battery life. To increase the battery life, connect
the ac adapter when you use the probe for more
than a few minutes.