Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 555 / 700

Chapter 17: Use Projects
Tutorial: Make a New Project
519
LinkWare Live will not use organization or subproject names you
create on the tester. If you use the format “
Organization
Name>>Project Name>>Subproject Name
” to enter names on the
tester, then sync the project to LinkWare Live, LinkWare Live will
use all of the names as the project name.
Step 1: Give the Project a Name
1-1
On the home screen, tap the
PROJECT
panel. The
PROJECT
screen shows the active project.
1-2.
Tap
CHANGE PROJECT
, then tap
NEW PROJECT
.
1-3.
Use the keyboard to enter a name for the project, then tap
DONE
.
Step 2: Specify an Operator
The operator is the person who will use the project to do a job.
2-1
On the
PROJECT
screen, tap the
Operator
panel, then select
or add an operator:
 To select a different operator, then tap a name in the
OPERATOR
list.
 To add an operator to the list, tap
NEW OPERATOR
, use
the keyboard to enter a name.
2-2.
Optional: Enter the email address that the operator will use
as an ID to sign in to LinkWare Live.
2-3.
When you are finished, tap
DONE
.
2-4.
To go back to the
PROJECT
screen, tap the name of the
operator you want to use.