Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 596 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
560
To use a Wi-Fi network
1
For a Versiv that uses an external Wi-Fi adapter, connect the
adapter to the tester’s USB port.
2
On the home screen, make sure the
Operator
name is correct.
The tester uses the email address associated with the operator
name as the ID when you sign in to LinkWare Live.
If no address is associated with the name, or if you enter a
different address on the
LWL SIGN IN
screen, the tester
associates the name with the address you enter.
3
On the home screen, tap
SYNC
.
4
Select a wireless network if necessary.
If the network setting are not correct, the tester shows the
NETWORK
screen and a message about the necessary settings.
a. To change the settings, tap the
Wi-Fi
panel.
b. To test the settings, go back to the
WI-FI PORT
screen, then
tap
CONNECT
.
When the tester connects to the network, the Wi-Fi
network connection icon shows at the top of the screen:
c. Go back to the
TRANSFER RESULTS
screen, then tap the
LinkWare Live
panel.
5
On the
LWL SIGN IN
screen, if necessary, enter the ID and
password for your LinkWare Live account, then tap
SIGN IN
.
Enter a user name and password for the network, if necessary.
6
If you use other people’s LinkWare Live accounts, the
ORGANIZATION
screen shows. Tap the organization you want
to use.
7
On the
SYNC PROJECTS
screen (Figure 206), select the projects
you want to sync, then tap
SYNC
.