Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 520 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
484
Editing Events in Bi-directional Results
When you edit an event in a bi-directional result, the tester copies
your change to the result you got from the other end and to the
averaged result. The tester copies your change to these events:

Loss

Reflection

Gainer

Ghost Source

Hidden
In some situations, the tester will not copy your change:
 The tester will not copy your change to events not listed
above, such as
Launch
,
Tail
, and
Bend
events.
 The tester will not copy your change if it did not calculate
averaged bi-directional results. This can occur, for example, if
you did the
End 1
and
End 2
tests with different wavelengths
or if a span was defined when you did the test.
 The tester will not copy your change to the results from the
other end if there was not an event at the correct location.
But the change will show in the averaged results.