Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 103 / 700

Chapter 2: Get Started
Options for Cable IDs
67
To make a set of sequential IDs
Example: You will do tests on four cables (A through D) in 10
rooms (01 through 10) on the first and second floors, for a total of
80 cables.
1
On the home screen, tap the
PROJECT
panel.
2
To save the ID set in a different project, tap
CHANGE PROJECT
,
then tap a project.
3
On the
PROJECT
screen, tap
NEW ID SET
.
4
On the
CABLE ID SETUP
screen, tap the
First ID
panel, then
use the keyboard to enter the first ID in your sequential set.
For this example, enter 1-01-A.
5
Tap the
Last ID
panel, use the keyboard to enter the last ID in
your sequential set, then tap
DONE
. For this example, enter
2-10-D.
6
Under
Select Media
, tap
Copper
or
Fiber
to specify the type of
tests that will use the IDs.
For IDs for fiber tests: Under
Fiber
, select the tests that are
necessary for the project. These selections let you use the
%
Tested
value on the home screen to monitor the progress of the
project. See Figure 198 on page 526.
7
To see the ID set, tap
REVIEW
.
8
On the
CABLE ID REVIEW
screen or the
CABLE ID SETUP
screen, tap
Save
.