Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 588 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
552
Import an ID Set into a Project
You can use LinkWare PC software to make ID sets, download
them to the tester, then import them into projects.
Note
ID sets that you download to the tester must have
the extension “.ids”.
To import an ID set
1
In LinkWare PC, select
Utilities
> (module name) >
Create ID
List
to make an ID set and download it to the tester.
2
On the home screen, tap the
PROJECT
panel.
3
Make sure the correct project shows on the
PROJECT
screen. If
necessary, tap
CHANGE PROJECT
to select a different project.
4
On the
PROJECT
screen tap
NEW ID SET
, then tap
IMPORT
.
5
On the
IMPORT CABLE ID
screen, tap the ID set you
downloaded.
6
Under
Select Media
, tap
Copper
or
Fiber
to specify the type of
tests that will use the IDs.
For IDs for fiber tests: Under
Fiber
, select the tests that are
necessary for the project. These selections let you use the
%
Tested
value on the home screen to monitor the progress of the
project.
7
Tap
IMPORT
.
Delete an Imported ID Set
If you go to the
PROJECT
screen and delete a cable ID set that you
imported into the project, the ID set is still available in the tester.