Extron electronics VNM EC 200, User Manual, Page: 17 / 242

Panels and Cabling
This section provides information on:
•
Front Panel Features
• Rear Panel Features
• Installation Overview
Front Panel Features
The front panel of the VNM EC 200 is shown in figure 6 below.
VNM EC 200
VNM ENTERPRISE CONTROLLER
CONFIG
PWR
SSD
LAN
A
LAN
B
A B
C
Figure 6. VNM EC 200 Front Panel
A
Config port — Mini-USB config port for basic network configurations and system
resets using Simple Instruction Set (SIS™) commands.
B
SSD Drive — This (removable) drive holds the operating system (OS) and software
required for operation.
C
Status LEDs — Four LEDs provide the status of the VNM EC 200 (see figure 6).
•
Network Activity LED (A) — This LED lights solid when a network link is
established and flashes to indicate activity on the first network.
•
Network Activity LED (B) — This LED lights solid when a network link is
established and flashes to indicate activity on the second network.
•
Drive Activity LED
— This LED flashes to indicate drive activity.
•
Power LED — This LED lights when the controller is powered.
ATTENTION :
• Do not remove the SSD drive when the VNM EC 200 is powered on. Power down
the controller (see Power Down Procedure on page 12) before removing the
drive.
• Veuillez ne pas retirer le lecteur SSD lorsque le VNM EC 200 est en marche. Le
contrôleur doit être éteint (voir la procédure de mise hors tension page 12) avant de
pouvoir retirer le lecteur.
VNM EC 200 • Panels and Cabling 7