Extron electronics VNM EC 200, User Manual, Page: 131 / 242

3. Drag one of the four software decoder channels from the Device List (see figure
108,
1
) and drop it onto the source device in the Preset panel (
2
).
VNS104:1
VNE200_1
1 1
2 2
VNE200_1
VNS104:1
Figure 108. Presets, Drag and Drop the VNS 104
NOTE: Output devices are positioned below and to the right of the source device
they are connected to.
4. Set output device attributes as required (see Device Attributes on page 101).
5. Click Save As and name the preset (see Preset List on page 97).
The connection between the source device and the VNS 104 Software Decoder
window is now available.
6. Either drop more software channels onto the encoder, or drag more encoders into the
Preset
panel, then drop additional software decoder channels onto them as required.
In this manner, connections are made between inputs (sources) and any or all channels of
the VNS 104 Multi-stream Software Decoder.
VNM EC 200 • Preset Manager 121