manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 71 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 71

Change Device Structure panel

NOTE:

 See 

Update a device license

 below for information on updating the structure 

key and checksum.

ATTENTION:

 

• 

DO NOT place information for a VNM EC 200 license

 into this menu. Doing so 

causes the device to stop responding.

• 

Ne pas mettre d'informations pour une licence VNM contrôleur entreprise dans ce 
menu. Si c’est le cas l’appareil risque d’arrêter de répondre.

• 

This menu is used for 

updating a device license 

only. See 

Controller Firmware 

and License Updates

 on page 182 for information about VNM EC 200 licenses.

• 

Ce menu est utilisé seulement pour mettre à jour la licence d'un appareil. Voir 

Controller Firmware and License Updates

 (Firmware de contrôleur et Mises 

à jour de licence ) à la page 182 pour obtenir des informations sur les licences du 
contrôleur VNM EC 200.

9

 

Structure 

— This field is used to update the structure key used by the device.

¢

 

Checksum 

— This field is used to update the checksum used by the device.

Update a device license

To obtain and install a new device license, follow the procedure below.

1. 

Contact the Extron S3 Sales and Technical Support Hotline and provide the following 
information:

• 

The 

device ID

 of the VN-Matrix device. This can be obtained from the back of the 

device.

• 

The 

order number

 of the VN-Matrix device.

2. 

The Extron S3 Sales and Technical Support Hotline provides a 

structure key

 and a 

checksum

.

• 

Enter the 

structure key

 into the 

Structure

 field (see 

figure 42

 

9

, on the 

previous).

• 

Enter the 

checksum

 into the 

Checksum

 field (

¢

).

3. 

Click 

Update

 

License

 (

£

) to save the new license.

 

VNM EC 200 • Device Configuration and Control

61

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments