manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 105 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 105

Preset Manager

This section provides instructions to connect, disconnect, and operate VN-Matrix Devices 
using the Preset Manager.  
Sections include:

• 

Presets Overview

• 

Preset Manager Page

• 

Preset List

• 

Matrix Devices List

• 

Preset Design Panel

• 

Device Attributes

• 

Recorder Directory and File Management

• 

Creating Presets

• 

Selecting a File for Playback

• 

Chase‑Play Feature (VNR 100 Only)

Presets Overview

Presets can quickly configure and connect devices to operate as a system and fall into three 
types:

• 

Switching presets

 (encoders and decoders only) – Connect an input device (encoder) 

to an output device (decoder).

• 

Recording presets

 (encoders and recorders only) – Connect input devices to the 

inputs (Record) of the recorder in order to record the connected stream.

• 

Player presets

 (players and decoders only) – Connect recorder outputs (Play) to 

stream previously recorded programs to an output device.

NOTE:

  The current settings for a device are reflected in the dialog boxes whenever they 

are accessed in the 

Device

 

List

 page, 

Actions

 bar. 

• 

Configuration changes made on the 

Preset

 

Manager

 page using 

Device

 

Attributes

 are applied only when the preset is launched. 

• 

Changes made to a device on the 

Device

 

List

 page are applied immediately. 

VNM EC 200 • Preset Manager

95

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments