Extron electronics VNM EC 200, User Manual, Page: 64 / 242

4
Sync on Green (SoG) (VN‑Matrix 200/225 only) — When selected, this check box
(see figure 38 on page 53) enables Sync on Green on the output analog waveform.
When SoG is enabled, separate horizontal and vertical syncs are present on the analog
output.
NOTE: SoG is currently limited to the output of progressive modes. If an interlace
mode is selected, the SoG request is ignored.
5
Playback Delay (s) — This field is used to enter the amount of time (in seconds) that
the display waits before playing back the source stream.
VN-Matrix 3xx Display Format
VNM 2xx Series VNM 3xx Series
1
2
3
4
5
1
2
3
Figure 39. VN‑Matrix 3xx Series Display Format Dialog Box
The VN-Matrix 3
xx
series display format dialog box (see figure 39) shares two configuration
options with the VN-Matrix 200/225 (see figure 38 ).
1
Current Format
3
Playback Delay (s)
These configuration options function identically to those on the VN-Matrix 2
xx
series Display
Format menu.
Genlock is added to the VN-Matrix 3
xx
menu, selected with the check box:
2
Genlock — When selected, enables a local SDI source with the same refresh rate as
the streamed video to act as a digital genlock signal to synchronize the decoder.
Compression Menu (Encoders Only)
When an encoder device is selected, click Compression (see
figure 31
on page 43) to
open the
Compression Settings
dialog box used to set the amount of compression on the
encoded source (see figure 40).
VNx 200/225 Series VNx 3xx Series
1
2
3
4
5
6
7
8
9
¢
£
¤
¥
2
3
4
5
6
7
8
£
¤
¥
Figure 40. Compression Dialog Box
VNM EC 200 • Device Configuration and Control 54