Preset List
The
Preset
List
panel (see
1
on the previous page) provides management
and control of the system presets from the preset list toolbar and provides a way to quickly
reconfigure devices.
System presets configure and connect groups of VN-Matrix devices for a specific task.
They are built using devices in the
Matrix
Devices
). Once defined in the
Preset
Design
workspace (
), presets are saved (
) to the
Preset
List
for use at a later
time.
Each preset can contain a mix of matrix devices that includes encoders, decoders, codecs,
and recorders. Controls to manage presets are provided at the bottom of the preset list
panel (
).
All saved presets are listed in the
Preset
List
workspace in alpha-numeric order. If the list
of presets is too long to display within the area, a scroll bar is on the right side of the pane.
NOTE:
Multiple presets can be active, however, the last preset launched takes
precedence when connections conflict with other active presets.
Preset List Controls
A toolbar at the bottom of the
Preset
List
workspace provides preset creation and
control (
). It is not possible to select multiple presets.
New
Select
New
to create a preset. When selected, it clears a previously loaded preset from the
preset design area (see
Note:
Preset names must not include spaces or non alphanumeric characters such as / \
*, % ! " £ $ % ^ & * ( )@~#?><. These characters are blocked from use. Underscore (_)
and hyphen (–) are permitted.
Launch
Launch configures and connects devices included in the preset.
Click
Launch
to activate a preset:
1.
Select a preset from the list.
2.
Click
Launch
to activate the preset.
Launch
is also available by right-clicking on a selected preset in the preset list.
Stop
Stop
clears all settings made in a preset when launched, including:
•
Connections between encoders or players and decoders or recorders are removed.
•
An active recording or playback is stopped.
VNM EC 200 • Preset Manager
97
Summary of Contents for VNM EC 200
Page 6: ......