Extron electronics VNM EC 200, User Manual, Page: 177 / 242

Configuring the Secondary EC 200 Time Settings
Use the following procedure to configure the time settings of the redundant secondary
VNM EC 200.
1. Log in to the redundant secondary VNM EC 200 (see Accessing the Web‑based
User Interface on page 11) and click the Configuration tab.
The Configuration page opens (see figure 160,
1
).
2 2
4 4
5 5
3 3
6 6
1 1
Figure 160. Configuration Page — Secondary Controller Time Setup
2. Under Device Properties , click the Time link (
2
).
3. Select the desired time zone from the Set timezone drop-down list (
3
). Choose the
same time zone selected for the redundant primary VNM EC 200.
4.
In the Clock Syncronization panel, check Enable Clock Synchronization
(
4
). This syncs the time settings of this VNM EC 200 to the devices listed in the
Sources field.
5. Click Add (
5
) to open the IP address dialog box. Enter the IP address of the
redundant primary VNM EC 200 and click OK to close the dialog.
6. Click Apply Changes to save the configuration (
6
).
VNM EC 200 • Dual (Redundant) Controller Configuration 167