Extron electronics VNM EC 200, User Manual, Page: 175 / 242

Setting the Role of the Secondary EC 200
Use the following procedure to set the role of the redundant secondary VNM EC 200 (see
Accessing the Web‑based User Interface on page 11 for information on how to log
in).
1. Log into the redundant secondary VNM EC 200 using the designated IP address and
click the Configuration tab.
The Configuration page opens (see figure 158,
1
).
3 3
1 1
2 2
4 4
Figure 158. Configuration Page — Redundant Secondary Role Setup
2. Click the Role link (
2
).
3. From the Device Mode drop-down list in the Device Mode panel, select
redundant_secondary (
3
).
NOTE: For information on the other device modes, see Role Page on page 22.
4. Click Apply Changes (
4
) to save the configuration.
NOTE: The Web-based user interface returns to the login page after saving the
configuration. This may take a few seconds.
VNM EC 200 • Dual (Redundant) Controller Configuration 165