Extron electronics VNM EC 200, User Manual, Page: 193 / 242

To update the VNM EC 200 license:
1. Click the Configuration tab to open the page (see figure 170,
1
).
If login information is required, see Accessing the Web‑based User Interface on
page 11.
2 2
3 3
4 4
1 1
Figure 170. Configuration Page — Updating the Controller License
2. Click the Certificates link (
2
).
3.
From the Controllers field in the Configuration panel, select the IP address of the
controller that requires a new license (
3
).
4. Click License (see figure 170,
4
).
The Controller License Management dialog box opens (see figure 171). Keep
this window open.
1 1
2 2
3 3
4 4
5 5
Figure 171. Controller License Management Dialog
5. Contact Extron Sales Support and provide the following information.
•
The serial number of the VNM EC 200 (see figure 171,
3
). This can be obtained
from the Controller License Management dialog, or from the rear panel.
•
The order number of the VNM EC 200.
NOTE: Contact information is available on the last page of this user guide.
6. Extron Sales Support provides a structure key and a license key .
•
Enter the structure key in the Options field (
1
).
•
Enter the license key in the Checksum field (
2
).
7.
Click Update License (
4
) to assign the new license settings.
8. Click X in the upper right corner of the dialog box (
5
) to close dialog box.
VNM EC 200 • Controller Firmware and License Updates 183