Extron electronics VNM EC 200, User Manual, Page: 176 / 242

Configuring the Primary EC 200 Time Settings
Use the following procedure to configure the time settings of the redundant primary
VNM EC 200. See
Accessing the Web‑based User Interface on page 11 for
information on how to log in.
1. Log in to the redundant primary VNM EC 200 and click the Configuration tab.
The Configuration page opens (see figure 159,
1
).
2 2
3 3
5 5
6 6
4 4
7 7
1 1
Figure 159. Configuration Page — Primary Controller Time Setup
2. Under Device Properties , click the Time link (
2
).
3. Make sure Enable Clock Synchronization is not checked (
3
).
NOTE:
If Enable Clock Synchronization is checked, the Set time (
5
) and
Set date (
6
) fields are not accessible (dimmed).
4. Select the desired time zone from the Set timezone drop-down list (
4
) and click
Apply Changes (
7
).
5. Enter the time in the Set time field (
5
).
•
Use the HH:MM:SS (hours:minutes:seconds) format based on the 24-hour clock.
For example, 08:25:00 or 20:35:10.
6. Enter or select the date in the Set date field (
6
).
•
Use the MM/DD/YYYY (month/day/year) format. For example, 04/04/2016.
7. Click Apply Changes (
7
) to save the configuration.
VNM EC 200 • Dual (Redundant) Controller Configuration 166