Extron electronics VNM EC 200, User Manual, Page: 183 / 242

Deleting nodes
1. Using a Web browser, navigate to the Web-based user interface by entering the
physical LAN A (eth
0 ) IP address of the redundant primary VNM EC 200.
2. Select the Configuration page (see figure 165 ,
1
on the previous page).
3. Click on the Node test link (
2
).
4. In the Sources list, select the node to delete.
5. Click Delete (
4
) located below the Sources list to remove the selected IP address.
NOTE: The redundant secondary VNM EC 200 automatically matches its Sources
list to the redundant primary VNM EC 200.
VNM EC 200 • Dual (Redundant) Controller Configuration 173