manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 54 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 54

Actions Menu Bar Features

The 

Actions

 menu bar buttons perform similar functions regardless of the device selected 

(see 

figure 31

 on the previous page). The following is an overview of each button and the 

devices they are associated with.

• 

Info (all devices)

 — The 

Info

 button provides information about the device including 

the Device ID, Device Name, IP address (control and streaming), current status (active, 
inactive), and the network link status (poor, good). These items change depending on 
the selected device.

• 

Connections (Encoders, Decoders, VNS 104)

 — The 

Connections

 button 

provides a real-time display of the device connections. 

• 

Configure (Encoders, Decoders, VNS 104)

 — The 

Configure

 button opens a 

dialog that provides the ability to name the device and enable the text overlay on the 
local display.

• 

Format (Encoders, Decoders, VNS 104)

 — The 

Format

 button opens a dialog that 

shows the current status of the device and allows selection and control of the input or 
output format, video and audio properties, and other configuration options depending 
on the selected device.

• 

Compression (Encoders and Decoders)

 — The 

Compression

 button opens a 

dialog used to configure the audio and video compression of the encoder and set the 
bitrate.

• 

Peripherals (Encoders and Decoders)

 — The 

Peripherals

 button configures the 

serial control port of the selected device.

• 

License (Encoders, Decoders, and Recorders)

 — The 

License

 button opens a 

dialog that shows information about the features that are enabled on the device.

• 

Upgrade (Encoders, Decoders, and VNR 100)

 — The 

Upgrade

 button opens a 

dialog that allows a firmware upgrade file to be downloaded to the selected device.

• 

Mode (Encoders, Decoders)

 — The 

Mode

 button opens a drop-down list used to set 

a selected codec device to either encoder or decoder operation.

• 

Misc (All)

 — The 

Misc

 button drop-down list has five options that include a real-time 

bandwidth monitor, a delete device function to remove the selected device from the 
device list, a multiple device licensing upgrade application, an OSD ID editor, and an 
application to issue HLI commands to the selected device.

• 

Recorder (Recorders only)

 — The 

Recorder

 button opens the recording browser to 

allow a user to select previously recorded streams. The browser provides information for 
each recording and allows users to manage the recordings of a selected device.

• 

Audio (VNS 104 only)

 — The 

Audio

 button opens the 

Configure

 

Audio

 

Settings

 

dialog. This dialog sets the level for the audio stream and also allows it to be muted.

NOTE:

  Only one of the connected video streams is able to decode audio. 

 

VNM EC 200 • Device Configuration and Control

44

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments