manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 28 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 28

Configuring the VN-Matrix Devices

For the VNM EC 200 to function properly with connected devices:

1. 

Update each VN-Matrix device with the IP address of the VNM EC 200 and configure 
each device to operate on the same network as the VNM EC 200.

2. 

Access the VNM EC 200 Web-based user interface by entering the  
IP address of the VNM EC 200 into the address bar of a Web browser.

3. 

Use the Web-based user interface to select one or more devices from the 

Devices

 

page and use the 

Actions

 menu bar at the bottom of the page to configure the 

selected devices (see 

Actions Menu Bar Features

 on page 44, and 

Mode Menu 

(VNC Devices Only)

 on page 63).

For information on configuring VN-Matrix devices, see the user guide for each device.

 

VNM EC 200 • Single EC 200 Configuration

18

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments