Extron electronics VNM EC 200, User Manual, Page: 161 / 242

13. In the Save Display Format As dialog box, enter a name for the new display format
and click OK (see figure 150).
NOTES:
• Resolutions must be saved using the following format at the beginning of the
filename: <
Hres> x <Vres> <Frame_Rate><Format>.
• The end of the filename can contain any identifying characters.
Examples:
640 x 400 85p
640 x 400 85p TEST
720 x 480 59.94p HDFrEND
Figure 150. Save a Display Format
14. After saving the new display format, note the grayed out fields are updated revealing the
timing details of the required display format.
15. Using the left browser tab , select the Devices page (see Creating a New Display
Format (Output Mode) on page 149) and choose a VN-Matrix decoder from the
device list.
16. From the Actions menu bar at the bottom of the Devices page, click Format . The
Display Format dialog box opens (see figure 151).
1 1
Figure 151. Display Format Menu
17. Select the new display format created in step 13 from the Output Format drop-down
list (see figure 151,
1
). The new display format is applied and the image is displayed.
VNM EC 200 • Format Editor Page 151