manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 185 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 185

Cluster Properties Pages

This section details the control options available using the 

Cluster

 and 

Node

 

Test

 pages. 

Procedures relevant to these pages are also detailed in this section.

Cluster Page

The 

Cluster

 page is used to view and manage the pairing status of the controller  

(see figure 167).

1

1

2

2

3

3

4

4

Figure 167. 

Cluster Page

Status panel (

1

)

This panel contains four read-only fields that display the following information.

• 

Active Cluster controller

 — Displays which VNM EC 200 (primary, secondary, or 

none) is acting as system master.

• 

Crossover status

 — Displays the status of the crossover link between the primary and 

secondary VNM EC 200s.

• 

Cluster

 — Displays whether the primary and secondary controllers are paired together 

or unpaired.

• 

Device Mode

 — Displays the role of the controller that is logged into (for example, 

whether it is the primary or secondary controller).

 

VNM EC 200 • Dual (Redundant) Controller Configuration

175

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments