manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 89 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 89

License Menu 

Click 

License

 to open the 

Device

 

License

 

Management

 dialog box. This dialog 

displays enabled features for the selected unit and enables optional features (see figure 56).

1
2
3
4
5

6
7

1
2
4
5

6
7

 

Figure 56. 

VND 250 (Left) and VNE 250 (Right) License Menu

NOTE:

 The 

Licensed

 

Features

 panel and 

Current

 

Structure

 panel fields are 

read-only (cannot be edited).

Licensed Features panel

The Licensed Features panel details the features currently enabled on the device.  

1

 

Video 

— Indicates the input signal format type.

2

 

Audio 

— Indicates the number of supported audio channels.

3

 

Video Scaler (VND 250 only) 

— Indicates whether video scaling is enabled or 

disabled.

4

 

Whiteboard 

— Indicates whether whiteboard data streaming is enabled or disabled.

5

 

Data 

— Indicates whether data streaming is enabled or disabled.

Current Structure panel

The Current Structure panel details the current structure code and its corresponding 
checksum. These are read-only (cannot be edited) fields. 

6

 

Structure 

— Shows the current feature set of the selected device. The values in this 

code correspond to the active features displayed in the 

Licensed

 

Features

 panel.

7

 

Checksum 

— Shows the checksum value used to enable the structure code. 

Upgrade Menu 

Click 

Upgrade

 to open the 

Upgrade

 

Device

 

Firmware

 dialog box used to upgrade the 

firmware (see 

Upgrade Menu (2xx and 3xx Devices)

 on page 62).

ATTENTION

:

 

• 

Ensure that compatible firmware is used to upgrade the selected VN-Matrix devices. 

• 

Assurez vois qu'un firmware compatible est utilisé pour mettre à jour les appareils 
VN-Matrix sélectionnés.

• 

Upgrading with incorrect firmware can cause the VN-Matrix devices to stop 
responding.

• 

Mettre à jour avec un firmware incorrect peut faire en sorte que les appareils 
VN-Matrix arrêtent de répondre.

 

VNM EC 200 • Device Configuration and Control

79

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments