manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 144 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 144

Custom Source and Display Formats Overview

Custom source and display formats may be created when a specific input or output mode 
is not supported in the standard list of resolutions supplied with a VN-Matrix device. Once 
defined, the parameters for custom input and output modes are stored on the VNM EC 200. 
This means that they are available for use on any VN-Matrix device that is managed by that 
controller.

NOTE:

  Custom input modes can only be created for unsupported analog input types. It 

is not possible to create custom input modes for digital inputs.

Figure 125 shows the recommended system configuration used to create a new input or 
output mode.

Network

VN-MATRIX 225 SERIES

RGB/DVI OVER IP

LAN-1
LAN-2
STATUS

VN-MATRIX 225 SERIES

RGB/DVI OVER IP

LAN-1
LAN-2
STATUS

Browser Based User

Control

VNM EC 200

VN-Matrix Encoder

VN-Matrix Decoder

Source

Display

Display

Figure 125. 

Recommended Setup for Creating Custom Input and Output Modes

 

VNM EC 200 • Format Editor Page

134

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments