manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 168 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 168

Alarm Type Reference Tables

Encoders

CLI Alarm

Alarm Description

Fault Description

Alarm Type

NOSRC

 

No Source

No input source is connected. 

Critical, Reporting

BADSRCSYN

  

Bad Source Syncs

An input source is connected 
but the sync timing is not 
recognized 

(unable to input 

source due to bad sync 
measurements).

Critical, Reporting

NOSDILOCK

No SDI Source Lock

An SDI source is connected 
but the signal timing is not 
recognized. 

(An SDI source is present but the 
PLL lock failed). 

Critical, Reporting

NOSDIMODE

Unsupported SDI 
Mode

The connected SDI source 
mode not supported.

Critical, Reporting

NOMODE

 

Unsupported Mode

The connected source is not 
supported; a user-mode must 
be created.

Critical, Reporting

BADSRC

Bad Source

A source is connected and 
syncs have been detected, but 
it is not possible to make active 
pixel measurements.

Critical, Reporting

PHASING

   

Analog Phasing Failure The analog pixel clock auto-

phasing process failed.

Warning, Reporting

HWNOVIDEO

    

Hardware Encoding 
Error

The hardware is unable to 
encode the input video.

Critical, Reporting

UNSUPAUDIOSRC

Unsupported Audio 
Source

The digital audio source has a 
bad or unsupported clock rate.

Critical, Reporting

BADAUDIOSRC

   

Bad Audio Source

The audio source is not valid 
for the current video source.

Warning, Reporting

VIDEOOVERLOAD

Data Rate Overload

The system is not able to 
process the source at the 
current settings; increase the 
compression. 

(The compressed data rate is too 
high, increase the compression).

Critical, Reporting

NWOVERLOAD

Network Overload

The network is dropping too 
many packets.

Warning, Reporting

BADREVAUDIO

  

Bad Reverse Audio

The reverse audio channel 
contains no data or has a large 
number of dropouts.

Warning, Reporting

 

VNM EC 200 • Alarms

158

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments