manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 201 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 201

Port

Transport Usage

22

TCP

HLI server port when running in secure mode. To access this port the 
user needs to enter login credentials.

23

TCP

Telnet (can be disabled).

69

UDP

TFTP Server, for firmware upgrades.

80

TCP

Secure HTTP data communication between the Web browser and 
the EC 200. Value is not definable; the default is 80. 

161

UDP

Simple network management protocol (SNMP) used for alarm access.

199

TCP

Simple network management protocol (SNMP) used for alarm access.

443

TCP

Secure HTTP data communication between the Web-browser and the 
EC 200. The value is undefinable and enabled only when the user has 
selected secure mode from the Web-browser.. 

554

TCP

Real-time streaming protocol (RTSP) server.

4002

TCP

Source stream information, used to telnet to a VN-Matrix decoder to 
view information about the source it is decoding.

5002

TCP

Serial port bidirectional protocol (not data channel streaming).

5432

UDP

EC 200 outgoing and incoming control messages used on the device 
acting as controller to communicate with other VN‑Matrix devices. 
Value is user definable; the default is 5432. 

5555

TCP

Old XML interface and old VN-Matrix recorder software application. No 
longer used.

6666

TCP

Keyboard and mouse forwarding.

7777

UDP

Upgrade daemon, local access only.

8000‑8098 
(even)

UDP

RTP unicast or RTP multicast audio, video, whiteboard, and data 
streams used as the port number of the destination (receiver). The 
controller selects a port number, starting at 8000. 

8001‑8099 
(odd)

UDP

RTCP channel for audio, video, whiteboard, and data streams used 
as  the port number of the destination (receiver). Grouped with the 
even‑numbered stream (8000 with 8001, 8002 with 8003, and so on).  

8000

TCP

Video streams, used as the port number of the source (sender).

8100

TCP

Audio streams, used as the port number of the source (sender).

8200

TCP

Whiteboard streams, used as the port number of the source (sender).

8201

TCP

Data streams, used as the port number of the source (sender).

9000

TCP

HSI interface when using ThorDebug.

9001

UDP

VN‑Matrix outgoing and incoming control messages. Communicates 
with port 5432 (or the user defined port number) on the EC 200.

9002

UDP

Default port for collecting UDP traffic for data transport. Value is 
user-definable.

9996

TCP

HLI server port when the EC 200 is not running in secure mode.

9997

TCP

Annotation server port.

9998

TCP

Telnet Command Line Interface (CLI) messages to the controller used 
for sending text-based control commands.

9999

TCP

Deprecated: Old remote control server, replaced by CLI (port 9998).

 

VNM EC 200 • Reference Information

191

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments