manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 102 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 102

Switcher Page

The Switcher page assigns encoders (sources) to decoders (displays). This allows the user 
to control streaming throughout the entire system using a single page. Use the following 
procedure to configure the Switcher page.

1. 

Click 

switcher

 (see figure 76, 

1

) to open the 

Switcher

 page (see 

Accessing the 

Web‑based User Interface

 on page 11 for information on how to log in).

192.168.0.30
192.168.0.31
192.168.0.32

192.168.254.254

192.168.254.254

192.168.254.254

switcher

1

1

Figure 76. 

Switcher Access Button

The 

Switcher

 page opens in a new window (see figure 77).

Figure 77. 

Switcher Window

NOTES:

 

• 

In the 

Switcher

 window, VN-Matrix 2xx series devices are in the upper part 

of the window and VN-Matrix 3xx devices are below. VNS 104 devices and 
recorders can be listed in either place.

• 

If a VNS 104 is in full screen mode, only a single channel is available for 
switching. The other three channels are listed, but are dimmed.

 

VNM EC 200 • Device Configuration and Control

92

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments