Extron electronics VNM EC 200, User Manual, Page: 190 / 242

Using the VNM EC 200 User Interface
To enter HLI commands using the VNM EC 200 Web-based user interface:
1. Access the Web-based user interface (see Accessing the Web‑based User
Interface on page 11).
2. From the Devices page, select a device. If necessary, multiple devices can be selected
by clicking the check boxes located on the left side of the Devices page (see Devices
Page Overview on page 39).
3. At the bottom of the Devices page, select the Misc menu.
A menu list opens (see figure 168).
1 1
Figure 168. Misc Menu — Select "Send HLI Command"
4. Select Send HLI command (see figure 168,
1
). A HLI command window opens (see
figure 169).
(enter command line)
(response)
Send HLI Command to selected devices - $id will be replaced with the device id
1 1
2 2
3 3
Figure 169. HLI Command Window
5. To send a command, click in the (enter command line) text box (see figure 169,
1
), and enter the desired HLI command.
6. Press <Enter> on the keyboard.
The response appears in the lower portion of the window (
2
).
Click the
X
button in the upper right hand corner (
3
) to close the HLI command
window.
VNM EC 200 • System Control 180