Extron electronics VNM EC 200, User Manual, Page: 205 / 242

General Commands
General commands are structured using both fixed commands and variables. In the following
pages, fixed commands are in
command fonts that identify the HLI commands. Variables
that represent the device identifier, argument, or parameter values are in
italic fonts
.
analogOutputEnable
The analogOutputEnable command enables or disables audio for devices running the
VNS 104 software decoder. The command is sent to window 4, the VNS 104 audio channel.
NOTE: This command uses zero-based window numbering. Channel numbers 0 to 3
refer to the top-left, top-right, bottom-left and bottom-right positions respectively.
Channel number 4 selects the audio channel.
Command line structure
—
analogOutputEnable
set device identifier swdecoder window 4 analogOutputEnable enablemode
]
Available parameters and arguments for this command are:
Parameter Argument Description
identifier Device ID , IP address
or Device name
enablemode enable or disable
Mutes or unmutes the audio.
For the following examples:
VNS 104: Device name = 104_Device1 , Device ID = 40001 , IP address =
192.168.0.41
Example 1 - Enable (unmute) audio on a VNS 104 using device name.
set device 104_Device1 swdecoder window 4 analogOutputEnable
enable
]
Example 2 - Disable (mute) audio on a VNS 104 using device ID
set device 40001 swdecoder window 4 analogOutputEnable disable
]
analogOutputMute
The
analogueOutputMute
command mutes or un-mutes the audio channel for devices
running the VNS 104 software decoder. The command is sent to window 4, the VNS 104
audio channel.
NOTE:
This command uses zero-based window numbering. Channel numbers
0
to
3
refer to the top-left, top-right, bottom-left and bottom-right positions respectively.
Channel number 4 selects the audio channel.
Command line structure
set device identifier swdecoder window 4 analogOutputMute mutemode
]
Available parameters and arguments for this command are:
Parameter Argument Description
identifier Device ID
,
IP address
or
Device name
mutemode normal or mute
mutes or unmutes the audio.
For the following examples:
VNS 104: Name = 104_Device1 , ID = 40001 , IP = 192.168.0.41
Example 1 - Mute the audio on a VNS 104 using the device name.
set device 104_Device1 swdecoder window 4 analogOutputMute mute
]
Example 2 - Unmute audio on a VNS 104 using the device ID.
set device 40001 swdecoder window 4 analogOutputMute normal
]
VNM EC 200 • Reference Information 195