Connections Menu
When devices are part of an active (launched) preset, the columns in the
Connections
menu populate with the connection details of the selected VN-Matrix device (see
on page 46). The
Connections
dialog adds the location of the
return audio path to the columns.
Format Menu (VNE 250)
Select the VNE 250 and click
Format
from the action bar to open the source menu.
Status
,
Measured Video Properties
,
Measured Audio Properties
, and
EDID
panel configuration is the same as the VNM 200/225/300/325 device (see
on page 48). The VNE 250 adds an input selection, HDCP authorization,
EDID selection, program audio selection, analog audio selection and return audio selection.
1
2
3
4
1
2
3
4
5
6
7
Figure 51.
VNE 250 Source Format
Input Configuration
1
Input Select
•
Auto
: When enabled, the HDMI input is automatically selected whenever a digital
source is detected.
The EDID settings become read only in this mode.
•
HDMI (1)
: Selects the HDMI input. The
EDID Settings
panel is active.
•
RGB (2)
: Selects the RGB input. The
EDID Settings
panel is active.
2
HDCP Authorize
: When an HDMI signal is detected, enable or disable HDCP
authorization.
EDID Settings
3
From Monitor
: This read-only field reports the EDID of the locally connected display. If
no display is present or the display does not support EDID,
<No Device>
is reported.
This is a read-only field (cannot be edited).
4
To Source
: This drop-down lists the EDID device type the VN-Matrix unit identifies itself
as when connected to a source. Values are chosen from the stored EDID codes used
on previously connected devices or from a fixed list of input formats.
NOTE:
If the transparent option is selected, the EDID of the last display or the
currently connected display is reported.
VNM EC 200 • Device Configuration and Control
69
Summary of Contents for VNM EC 200
Page 6: ......