Extron electronics VNM EC 200, User Manual, Page: 103 / 242

2. In the Sources column, click an encoder (sources) (see figure 78,
1
).
The selected box darkens.
3. In the Displays column, click a decoder (displays) (
2
).
The selected box darkens.
4. Click Take (
3
).
A connection is created between the selected encoder (source) and decoder (display).
•
Figure 78 shows that the JMP9600 Source is streaming media to
Rack_Decode .
•
Also, the VN-Matrix 300 source, VNM300_Encode , is streamed to the display,
VNM300_Decode (both highlighted in figure 78) when Take is pressed.
1 1
2 2
3 3
Figure 78. Switcher Window "Take"
5. Repeat this procedure to create other connections as necessary.
NOTES:
• To remove a connection, select a connection from the Connections column
and click Break Connection from the drop-down list.
• To break all connections, select any connection and click Break All
Connections .
• Selecting Break All Connections immediately disconnects all devices. No
other warning is given.
6. If audio data is present within the stream, click on the edit link located at the top right
of the Switcher page and select the Switch audio with video option (see
1
,
below). This keeps the audio and video together when creating connections.
Select Edit Hidden Devices (see next page) to display a pop-up that allows the
user to hide any devices on the Switcher page.
VNM EC 200 • Device Configuration and Control 93