Extron electronics VNM EC 200, User Manual, Page: 32 / 242

Role Page
The Role page is used to set the mode of the VNM EC 200.
1 1
Figure 17. Role Page
To set the role, from the Device Mode drop-down list (see figure 17,
1
) select:
•
singleton — Select this option when a single VNM EC 200 is the system controller.
• redundant_primary — Select this option when a VNM EC 200 is running as the first
(primary) unit of a redundant pair.
• redundant_secondary — Select this option when a VNM EC 200 is running as the
second (secondary) unit of a redundant pair.
NOTE: If the Device Mode field is set to redundant_primary or
redundant_secondary , the cluster properties pages are available for configuration
(see Cluster Properties Pages on page 175).
For information on setting the different device modes, see
Setting the Role
on page 15,
Setting the Role of the Primary EC 200
on page 164, and
Setting the Role of the
Secondary EC 200
on page 165.
VNM EC 200 • Advanced Controller Configuration 22