Extron electronics VNM EC 200, User Manual, Page: 163 / 242

• Interlaced — Check this box to use interlaced video.
• Fixed Geometry — This function is currently not implemented.
Click SaveAs in the lower right corner (see figure 152 ,
6
on page 152), to save the
resolution to the list with a new name. For additional information on creating source formats,
see
Creating a New Source Format (Input Mode) on page 135.
NOTES:
• Resolutions must be saved using the following format at the beginning of the
filename: <
Hres> x <Vres> <Frame_Rate><Format>
.
• The end of the filename can contain any identifying characters.
Examples:
640 x 400 85p
640 x 400 85p TEST
720 x 480 59.94p HDFrEND
Display Format Editor
1. Select the Format Editor tab (see figure 153,
1
).
2.
Click the Display Formats bar (
2
) to open a list of display resolutions.
3. Select the desired source format resolution (
3
). The properties populate the Display
Format panel on the right (
4
).
1 1
2 2
3 3
4 4
6 6
5 5
Figure 153. Display Resolution Properties
Display Format Editor
(
4
)
To create a new display format, modify the Display Format panel fields on the right as
needed (see figure 153):
•
Active Pixels — Specify the horizontal resolution (number of pixels wide).
• Active Lines — Specify the vertical resolution (number of pixels high).
• Total Pixels — Specify the total number of pixels (including syncs and blanking).
• Total Lines — Specify the total number of lines (including syncs and blanking).
VNM EC 200 • Format Editor Page 153