Extron electronics VNM EC 200, User Manual, Page: 162 / 242

Deleting Formats
NOTES:
• The default resolutions provided with the VNM EC 200 cannot be deleted.
• Custom resolutions that are in use by any active VN-Matrix device cannot be
deleted.
To delete a custom resolution format, select a resolution and click Delete located at the
lower right corner of the Format Editor page (see figure 152,
7
below).
Source Format Editor
To view or change the properties of a source format:
1. Click the right tab , (see figure 152,
1
).
2. Click the Format Editor tab (
2
).
The Format Editor page opens.
3. Click the Source Formats bar to open a list of source formats (
3
).
4. Select the desired source format (
4
). The properties of the selected resolution are
listed in the Source Format panel on the right (
5
).
2 2
3 3
4 4
1 1
5 5
6 6 7 7
Figure 152. Source Resolution Properties
Source Format panel (
5
)
To create a new source format, modify the desired fields:
• Line Count — Specify the number of horizontal lines of information.
• Line Period (ms) — Specify how often the horizontal lines of information are updated.
•
Pixels Per Line — Specify how many pixels are used to create each line of information.
• HSize — Specify the horizontal resolution (number of pixels wide) from the source.
• VSize — Specify the vertical resolution (number of pixels high) from the source.
• First Pixel — Specify the position of the first active pixel in the line.
•
First Line — Specify the position of the first active line in the frame.
• Trisync Ignore — Zero for all source types. 100 for source types using tri-level sync.
VNM EC 200 • Format Editor Page 152