manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 145 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 145

Creating a New Source Format (Input Mode)

There can be instances when a VN-Matrix device configured as an encoder cannot detect 
an input source. This can happen when: 

• 

An unrecognized input source connected to the encoder is not defined in the format 
menu (see 

Measured Video Properties panel

 on page 49).

• 

The timing of the input source deviates from the standard timings for that signal. 

In these situations, a custom input mode can be created for the source. 

NOTE:

  Custom input modes are only required for analog sources. A VN-Matrix device 

automatically creates custom input modes for DVI sources based on their EDID.

Use the following procedure to create a custom source format (input mode).

NOTE:

  This procedure relates to creating a specific new mode (

1280 x 600 60Hz, 

progressive

). However, it can be used to create any new input mode.

1. 

Connect a source that requires a custom input mode to a VN-Matrix encoder.

2. 

Connect a display monitor to the out/loop connector on the encoder. An analog monitor 
can also be used, but is not recommended.

NOTES:

 

• 

Using a DVI display eliminates any issues with the monitor not correctly 
sampling the analog input. If the display device in use does not fully support the 
source format, then it may not be possible to properly adjust the settings for the 
encoder itself.

• 

The VN-Matrix encoder is designed to accept an analog source and output a 
digital image on the DVI-I out/loop connector if a digital display is connected.

• 

Initially, there may not be any image output to the display from the  
DVI-I out/loop connector. If this happens, the default splash screen is displayed.

3. 

Connect the encoder to the VN-Matrix network.  
See the VN-Matrix 200 / 225 / 300 / 325 user guides for more information.

4. 

Open a Web browser on the control PC and log into the VNM EC 200 (see 

Accessing 

the Web‑based User Interface

 on page 11). Keep this tab on the left (see figure 

126, 

1

).

5. 

Duplicate

 the Web-based user interface of the VNM EC 200 using a second browser 

tab. Keep this tab on the right (

3

).  

Leave both browser tabs open

 as they are needed to complete this procedure (see 

images below).

6. 

On the left tab

, select the 

Devices

 page (

2

).

First Tab, Devices Selected

Second Tab, Format Editor Selected

1

1

3

3

2

2

4

4

Figure 126. 

Devices and Format Editor

 

VNM EC 200 • Format Editor Page

135

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments