Extron electronics VNM EC 200, User Manual, Page: 198 / 242

3. Click the Upgrade link in the left panel (see figure 179 ,
2
on the previous page).
4. Click Browse (
3
), and use the file browser to navigate to the firmware file location.
5. Select the file and click Open .
6. Click Upgrade , (
4
).
Pair the Controllers
1. When the primary controller upgrade completes the upgrade, click the
Configuration tab (if the tab is not open).
The Configuration page opens (see figure 180,
1
).
1 1
2 2
3 3 4 4
none
connected
unpaired
redundant_primary
192.168.254.250
192.168.253.0
Figure 180. Configuration Page — Primary Controller Pairing
2. Click the Cluster link (
2
).
3. Click Pair (
3
).
4. Click Apply Changes (
4
).
Note the
Cluster IP Address
, in this example:
192.168.254.250
.
Restore Data
The Restore Data dialog is used to restore the Device List and the Preset Manage r
page from a previously saved file. This operation is not reversible.
1. On the Configuration>System Properties>System config page (see figure
173 ,
2
, on page 185), click Restore Data .
The following dialog opens:
Figure 181. Confirm Data Restore Dialog
2. Click Yes (see figure 181,
1
).
Configuration>System
Properties>System config
VNM EC 200 • Controller Firmware and License Updates 188