manualshive.com logo in svg

Extron electronics VNM EC 200, User Manual, Page: 53 / 242

Share
Download
Extron electronics VNM EC 200 User Manual Download Page 53

Actions Menu Bar Overview

The 

Actions

 menu bar, located at the bottom of the 

Devices

 page when a device is 

selected, is used to check information, configure, license, and upgrade controlled devices. 
Actions menu items change with the selected device (see figure 31).

Actions:

Upgrade

Compression

Peripherals

License

Info

Connections

Configure

Format

Mode

Misc

Group

Actions:

Upgrade

Peripherals

License

Info

Connections

Configure

Format

Mode

Misc

Group

Actions:

Upgrade

License

Info

Recorder

Configure

Misc

Group

Actions:

License

Info

Recorder

Misc

Group

Actions:

Audio

Info

Connections

Configure

Misc

Group

Actions:

Format

Info

Misc

Group

Decoder

VN-Matrix Recorder

VNS 104 

Encoder

VNS 104 Decode Windows

VN-Matrix Recorder Sub-channel

Figure 31. 

Actions Menu Bar

Using the actions menu bar, the following sections provide individual configuration and 
connection details for the various VN-Matrix devices.
Click a device on the 

Devices

 page (see figure 32) to open its action bar. Click an action 

bar menu item to open a dialog box with configuration options for its intended operation.

√

Figure 32. 

Encoder Actions Bar

The VNM 325 is selected in the example in figure 32 (outlined in red). Notice the check in 
the device selection box. When a device is selected, the 

Actions:

 bar at the bottom of the 

page enables all options, connections, and configuration for the device.

 

VNM EC 200 • Device Configuration and Control

43

Summary of Contents for VNM EC 200



















































































































































































































































Reviews:

No comments