Chase-Play Feature (VNR 100 Only)
The chase-play feature allows a user to view a live recording while the recording is in
progress. The live file can be played, paused, or searched from any point in the file as the
recording progresses.
Configuration
A recording preset is built and configured in the normal way (see
page 122). Note the directory and filename given to the recording (see figure 121).
Action when file is launched.
Directory for the live recording.
Action when file is launched
Directory
y
for the live recording.
g
File name of the live recording.
Figure 121.
Device Attributes, Recording Preset for Live Recording
A corresponding player preset is built and configured in the normal way using the
same directory and filename configured in the recorder preset (see
Figure 122.
Device Attributes, Player for Live Recording
NOTE:
When selecting the playback filename, a file that is currently recording is flagged
with a red record marker in the file browser (see figure 123).
Figure 123.
File Browser, Active Recording
To begin chase-play:
1.
Launch the recorder preset. The transport bar opens with the recorder in pause (see
Transport Dialog Box – Recorder
2.
Start the recorder from the transport bar.
3.
Launch the player preset (see
Transport Dialog Box – Recorder
on page 125). The
transport bar opens with the player in pause.
4.
The player file transport bar displays the file information for the live recording. Transport
control behavior in live flow is shown in the following table.
VNM EC 200 • Preset Manager
131
Summary of Contents for VNM EC 200
Page 6: ......